0

Car Amplifiers

Does your music lack punch at higher volumes, or does your subwoofer sound weak on the head unit's own power? An amplifier typically gives your speakers and subwoofer the power they need to play cleanly. This category contains 1- and 4-channel car amplifiers from DS18 for your audio project.

How to choose the number of channels

A 1-channel amplifier, also called a mono amplifier, is typically intended for a subwoofer. A 4-channel model can drive four car speakers, and when bridged, the channels can be combined in pairs into two channels with more power. From DS18 we carry both types, e.g. 4-channel SXE models in Class A/B and Class D as well as 1-channel Class D models.

Power, impedance and amplifier class

Look at the RMS power at the impedance your wiring gives. Power typically increases as impedance drops. One of DS18's 1-channel models, for example, is rated at 300 watts at 4 ohms and 800 watts at 1 ohm. Match the amplifier's RMS power to the power handling of your speakers or subwoofer, and check that the amplifier is specified for the load you connect. Class D typically generates less heat and takes up less space at the same power, while Class A/B is a classic design for speakers. The choice depends on space, power requirements and your preferences for the sound.

Installation and power supply

The power cable, fuse and ground connection must match the amplifier's power. Place the amplifier with air around the heatsink to avoid overheating. Also check whether your head unit has low-level outputs or whether you need a line output converter. At high power levels, the car's electrical system can become a limitation. A suitable speaker enclosure for the subwoofer belongs in the same project, and more parts for your system can be found under audio components.

Frequently asked questions

Can I drive a subwoofer with a 4-channel amplifier?

It is possible by bridging two channels, if the subwoofer's impedance matches the amplifier's specification for bridged operation. However, a 1-channel amplifier is typically intended specifically for subwoofers and often delivers the most power at low impedance.

What do the ohm figures in the product name mean?

They indicate how much RMS power the amplifier is specified for at a given load, e.g. 1, 2 or 4 ohms. Lower impedance typically gives more power, but only if the amplifier is rated to operate at that load.

Why does the amplifier shut off during use?

It can be caused by overheating due to poor ventilation, too low impedance, a weak ground connection or power cables that are too thin. Check placement, wiring and cables, and compare with the amplifier's specifications.

View as Grid List
Sort by
Display per page