0

Engine Rebuild Kits

Has your engine lost compression, is it burning oil, or has it reached the number of operating hours where a full rebuild is due? A complete engine rebuild kit brings together the parts you typically need to rebuild the engine, in one kit for the specific model.

What a complete rebuild kit contains

An engine rebuild kit brings together the wear parts that are typically replaced during a rebuild – e.g. piston, piston rings, gaskets and oil seals, and in some kits also bearings or other parts. The exact contents depend on the kit, so check the product description for the specific part number. In this category you will find kits from Vertex Pistons for e.g. KTM, Honda and Can-Am as well as models such as YZ 250 F, KX 125 and Ranger 800 4x4.

How to choose the right kit

The kits are made for specific models and model years, which are stated in the product name. In addition to the model, you should look at:

  • Model year: the same model can have different parts depending on the year, so compare with the range in the name, e.g. 03-04 KX 125 or 14-17 YZ 450 F.
  • Piston size: some kits are available in oversize, e.g. 1.00 mm, for a cylinder that has been bored out. Measure the cylinder before you choose.
  • Engine condition: if the crankshaft, cylinder or cylinder head is worn beyond tolerances, you may need parts in addition to the kit.

Installation and related parts

A rebuild typically requires precise measurements, correct tightening torques and careful break-in according to the manufacturer's instructions. If you also want more displacement, stroker kits may be relevant, and if the balance shaft is worn, you will find balance shaft kits under the same parent category for engine kits and rotating assemblies.

Frequently asked questions

How do I know whether I need standard size or oversize?

It depends on the cylinder's dimensions and wear. Measure the bore with a precision instrument, or have it measured at a workshop. If the cylinder has been bored out, the piston must match the new bore, e.g. 1.00 mm over standard.

Are all gaskets and parts included in a complete kit?

Not necessarily. The contents vary from kit to kit, and parts such as the crankshaft or valves may be left out. Check the product description for the specific part number, and compare with the parts your engine actually needs.

How should the engine be broken in after the rebuild?

Follow the break-in instructions for the specific piston and your engine. Typically this means warming the engine up thoroughly, avoiding high loads and constant RPM at first, and checking for leaks before you ride hard.

View as Grid List
Sort by
Display per page