0

Exhaust Tips

Does your exhaust look anonymous behind the bumper, or do the current tips not suit your project? Exhaust tips are the visible finish of the system and come in a range of materials, shapes and diameters. This category is for you if you want to give the rear end a precise finish without changing the rest of the exhaust.

What an exhaust tip does

The tip sits at the very end of the tailpipe and determines how the exhaust looks from behind. Depending on its design, it can also direct the flow of exhaust gas and change the tone slightly, but it typically does not affect engine performance. The category includes both universal parts and model-specific kits, e.g. carbon fibre tail pipe sets from Akrapovic for the BMW M2, M3, M4 and M5, and short turnouts – pipes that direct the gas downwards or to the side – from Kooks. Other brands in the category include aFe, Gibson, Remus and Stainless Works.

How to choose the right exhaust tip

Looks matter, but fitment decides whether the result holds up. Consider several factors at once:

  • Diameter: the inlet must match the outside diameter of the tailpipe, otherwise the tip can sit crooked or loose.
  • Material and finish: stainless steel, black or polished surface, or carbon fibre – your choice affects both appearance and maintenance.
  • Shape and length: round, octagonal or hexagonal outlets and a length that gives suitable clearance to the bumper.
  • Fastening: depends on the product; some tips can be fitted with clamps, others are part of a model-specific kit.

Fitting, inspection and maintenance

Check the clearance to the bumper and plastic parts, as heat from the exhaust can discolour or deform the surrounding area; heat protection can help where space is tight. Whether the tip can be used without issues at a vehicle inspection depends on the product and the car, so check the rules and documentation for the specific part number. Soot and road salt are best removed with a mild cleaner when the system is cold. If you want to change the sound more than a tip can, a new muffler or a complete exhaust system is a better place to start.

Frequently asked questions

Can an exhaust tip change the sound of the car?

Typically only slightly. The sound is mainly determined by the mufflers and pipe routing further forward in the system. The shape and opening of the tip can change the tone a little, but how much depends on the specific product.

How do I measure which tip fits?

Measure the outside diameter of the tailpipe with a caliper, and note how far the pipe extends behind the bumper. Then compare with the inlet size and length in the product description before you choose.

Does a new exhaust tip need to be approved for inspection?

It depends on the product and the car. Positioning, sharp edges and how far the tip protrudes can matter. Check the documentation and applicable rules for the specific part number before fitting.

How do I keep a black, polished or carbon fibre tip looking good?

Clean off soot and road salt regularly with a mild cleaner suited to the surface, and let the tip cool down first. Avoid abrasive products, especially on black finishes and carbon fibre.

View as Grid List
Sort by
Display per page

BORLA Universal Tip - Round

bor20156
Borla Universal Polished Tip Single Round Rolled Angle-Cut w/Clamp (inlet 2 1/2in. Outlet 4 x 4in) *
104,97 € excl. VAT

BORLA Universal Tip - Round

bor20103
Borla Universal Polished Tip Single Round Intercooled (inlet 2 1/4in. Outlet 2 1/2in)
87,35 € excl. VAT

BORLA Universal Tip - Round

bor20245
Borla 2.25in Inlet 4in Round Rolled Angle Cut x 12in Long Embossed Exhaust Tip
105,26 € excl. VAT

BORLA Universal Tip - Round

bor20249
Borla 4in Inlet 5in Round Rolled Angle Cut w/ Clamp x 14in Long Exhaust Tip
142,63 € excl. VAT

BORLA Universal Tip - Round

bor20246
Borla Universal Exhaust Tips
112,27 € excl. VAT

BORLA Universal Tip - Round

bor20251
Borla 3in Inlet 4.25in Round Rolled Angle Cut x 4in Long Universal Exhaust Tips
77,52 € excl. VAT

BORLA Universal Tip - Round

bor20248
Borla 2.25in Inlet 4in Round Rolled Angle Cut Resonated x 13in Long Exhaust Tip
96,11 € excl. VAT

BORLA Universal Tip - Round

bor20102
Borla Universal Polished Tip Single Round Intercooled (inlet 2in. Outlet 2 1/2in)
87,35 € excl. VAT

BORLA Universal Tip - Round

bor20106
Borla Universal Polished Tip Single Round Angle-Cut (inlet 2 1/4in. Outlet 2 1/4in)
77,48 € excl. VAT

BORLA Universal Tip - Square

bor20115
Borla Universal Polished Tip Single Square Angle-Cut Intercooled (inlet 2 1/4in. Outlet 2 1/2 x 2 3/
125,92 € excl. VAT

BORLA Universal Tip - Square

bor20132
Borla Universal Polished Tip Single Square Angle-Cut Intercooled (inlet 2 1/2in. Outlet 2 7/8 x 2 3/
111,92 € excl. VAT

BORLA Universal Tip - Square

bor20241
Borla 2.25in Inlet 3.28in x 3.5in Square Rolled Angle Cut x 7.88in Long Exhaust Tip
89,95 € excl. VAT

BORLA Universal Tip - Turn Down/Out

bor20110
Borla Universal Polished Tip Single Round Turndown/Turnout (inlet 2 1/2in. Outlet 2 1/2in) *NO Retur
118,19 € excl. VAT

Dual Exhaust Tip

mag35227
MagnaFlow Tip Stainless Double Wall Round Dual Outlet Polished 3in DIA 2.25in Inlet 9.75in Length
203,82 € excl. VAT

ExhstTailPipeTip - M-5260-CT3

frpM-5260-CT3
Ford Racing 17-22 Super Duty Exhaust Tip - Chrome
162,32 € excl. VAT

Gibson Exhaust Tip

gib71-1013
Gibson Patriot Series Rolled Edge Slash-Cut Tip - 5in OD/2.5-2.75in Inlet/12in Length - Blk Ceramic
248,44 € excl. VAT

Gibson Exhaust Tip

gib500380
Gibson Round Single Wall Angle-Cut Tip - 4in OD/3.5in Inlet/12in Length - Stainless
130,81 € excl. VAT

Gibson Exhaust Tip

gib500432
Gibson Rectangle Sport Tip - Center - 6x2.75in OD/2.5in Inlet/9.5in Length - Stainless
133,93 € excl. VAT

Gibson Exhaust Tip

gib500645-B
Gibson Rolled Edge Angle-Cut Tip - 4in OD/3.5in Inlet/12in Length - Black Ceramic
151,93 € excl. VAT

Gibson Exhaust Tip

gib500383
Gibson Turn Down Slash-Cut Tip - 3in OD/2.5in Inlet/12in Length - Stainless
136,48 € excl. VAT

Gibson Exhaust Tip

gib500362
Gibson Round Single Wall Straight-Cut Tip - 3in OD/2.5in Inlet/8in Length - Stainless
107,67 € excl. VAT

Gibson Exhaust Tip

gib76-1003
Gibson Patriot Skull Rolled Edge Angle-Cut Tip- 5in OD/2.25-2.5in Inlet/12in Length - Black Ceramic
271,95 € excl. VAT

Gibson Exhaust Tip

gib71-1015
Gibson Patriot Series Rolled Edge Slash-Cut Tip - 5in OD/3.5in Inlet/12in Length - Black Ceramic
256,02 € excl. VAT

Gibson Exhaust Tip

gib500553
Gibson Round Single Wall Angle-Cut Tip - 4in OD/2.25in Inlet/12in Length - Stainless
85,58 € excl. VAT