Fork Seal Kits
Is oil seeping down the fork tubes, or are the dust seals cracked and hard? A fork seal kit gives you new oil seals and often dust seals too, so the front fork on your motorcycle can once again keep the oil in and the dirt out.
What do the seals in the fork do?
The oil seal sits at the top of the outer fork leg and holds the fork oil in while the fork tube moves up and down. The dust seal above it wipes dirt, water and insects off the tube before they reach the seal. A leaking seal can cause oil loss, altered damping and, in the worst case, oil on the front brake, so it pays to replace it in time. The kits belong to our oil seals, and some of them, e.g. from Pivot Works, include both oil and dust seals.
How to choose the right kit
Fitment is determined by the dimensions, so check in particular:
- Tube diameter – e.g. 39, 41 or 43 mm.
- Outer diameter and height – stated as e.g. 43 x 55.5 x 4.7/14.
- Contents – oil seal only, dust seal only or a complete kit.
- Year and model – kits from e.g. Bikers Choice are specified for certain model years.
If you are unsure, measure the old seal. The category also includes brands such as KYB Powersports and Cometic Gasket.
Installation and maintenance
A replacement typically requires disassembling the fork leg and filling with new fork oil according to the manufacturer's instructions. At the same time, inspect the tube for scratches and rust, as a damaged surface can quickly ruin a new seal. If a seal is only weeping slightly, dirt under the lip may be the cause; a tool such as the BikeMaster Fork Seal Cleaner for 45-55 mm can be used to try to clean under it.
Frequently asked questions
Should I replace the oil seal and dust seal at the same time?
It is typically recommended, because the fork has to be disassembled anyway, and a worn dust seal lets dirt in to the new oil seal. Many kits contain both, but check the contents for the specific part number.
How do I find the right seal size?
Find the tube diameter in your motorcycle's specifications, or measure the old seal's inner and outer diameter as well as its height. Compare with the dimensions in the product name, e.g. 45 x 57.3 x 6/13, before you order.
Why does the fork start leaking again shortly after a replacement?
It is often caused by scratches, rust or dents on the fork tube, a seal that has been fitted at an angle, or a lip that was damaged during installation. An incorrect oil level can also put strain on the seal, so follow the manufacturer's instructions.