0

Oils, Fluids & Additives

Is your engine due for an oil change, or do parts and bolts need to be lubricated properly before the engine is assembled? This category brings together engine oil, oil filters and assembly lubricants, so you can handle both routine servicing and a bigger project where correct torquing and lubrication at first start-up matter.

Oil and oil filters for routine servicing

Engine oil lubricates, cools and keeps the engine clean, while the filter traps particles so they don't circulate through the system. Under engine oil you choose based on the viscosity and specification stated by the engine manufacturer, and on how the engine is used, e.g. hard driving or high temperatures. The Athena oil filters are listed for specific models, e.g. from Suzuki, Kawasaki and Yamaha, so you need to match the filter to model and year and not just to thread and size.

How to choose lubricant for bolts and assembly

The lubricant on the thread affects friction and therefore how much of the tightening torque becomes preload in the bolt. So use the torque values that belong to the exact lubricant you are using. A value specified for engine oil does not necessarily apply to an assembly grease. ARP Ultra Torque Lube is available in several sizes, from small brush-top bottles to larger containers, so you can choose based on whether it's for one project or regular workshop use. Manley Extreme Pressure Lube from Manley Performance is another example. Check the product description to see which parts it is intended for.

Maintenance and typical mistakes

Change oil and filter at the same time, and follow the interval the engine is designed for. A shorter interval can be relevant for track days, lots of short trips or after an engine rebuild. Check the oil level again once the engine has run and the oil has settled. Typical mistakes are wrong viscosity, a filter for a different model and lubricants used for a purpose they are not intended for. The category also includes the Maxima brand, and you'll find more fluids and sealants under oils, fluids and sealants.

Frequently asked questions

Why does the torque value need to match the lubricant on the thread?

The lubricant changes the friction in the thread and under the bolt head. With the same torque, the preload can therefore end up too low or too high if the value is calculated for a different lubricant. Follow the bolt manufacturer's instructions.

How do I find the right oil filter?

Match the filter to model, year and engine size in the product name or product description. Thread and outer dimensions alone are not enough, as e.g. the bypass valve and filtration can differ from filter to filter.

How often should oil and filter be changed?

It depends on the engine, the oil and your driving. The starting point is the manufacturer's interval. For track days, many cold starts or after an engine build, a shorter interval can be relevant.

View as Grid List
Sort by
Display per page