0

PTFE Hoses

Does your garage smell of fuel even though every joint is tight? Ordinary rubber hoses can let fuel vapours permeate through the wall. Hoses with a PTFE liner are typically far less permeable and withstand fuel, oil and many chemicals, so they suit projects with a new fuel system or oil cooler.

What the PTFE liner does

On the inside sits a PTFE liner, and on the outside a braided cover protects against abrasion. In this category you will find, for example, black nylon braid from Vibrant. The liner typically handles fuel, oil and high heat better than rubber, but the hose is stiffer than a braided hose with a rubber core and can kink if bent tighter than the manufacturer's minimum bend radius. For coolant and intake, silicone hoses are usually the right choice.

How to choose PTFE hose

  • Size: The AN size must match your flow requirements, pump and connections. We stock, for example, -6, -8, -10 and -12 as well as hoses in 5/16 and 3/8 inch.
  • Bulk hose or ready-made hose: Hose by the length, e.g. 5 or 20 feet, gives you freedom in routing, while pre-assembled PTFE hoses come in fixed lengths with straight, 45- or 90-degree ends.
  • Fittings: Use hose ends designed for PTFE hose. Ends for rubber hoses typically do not seal correctly on the hard liner.
  • Kits: A kit such as the Radium Engineering 8AN Universal PTFE Hose Kit can simplify your purchase. Check the contents for the specific part number.

Installation and inspection

Cut the hose cleanly so the braid does not fray, follow the manufacturer's instructions for assembly and tightening, and pressure test the system before starting the engine. Regularly check the cover for wear and the ends for moisture. On long, fixed runs, hard lines can be combined with PTFE hose on the sections that need to move. Besides Vibrant and Fragola, you will also find Aeromotive, Russell and DeatschWerks in this category.

Frequently asked questions

Can I use regular AN hose ends on PTFE hose?

Typically not. The PTFE liner is harder than rubber, so the ends must be designed for PTFE, often with an internal olive. Always check that the hose end and hose are made for each other.

Is PTFE hose compatible with E85?

The PTFE liner typically handles ethanol blends such as E85 well, and that is one of the reasons to choose it. However, make sure that the fittings, pump and other parts of the system are also designed for the same fuel.

How do I avoid kinking the hose during installation?

Stick to the manufacturer's minimum bend radius and plan the routing before you cut. Use angled fittings instead of sharp bends, and secure the hose so it does not rub against edges or rest against hot parts.

View as Grid List
Sort by
Display per page