0

Return-Style Fuel Regulators

Does your fuel pressure drop under load, or do you need to adjust the pressure after fitting a new pump or larger injectors? A return-style regulator keeps the pressure stable by sending excess fuel back to the tank. This category is for EFI projects with a return line.

How a return-style regulator works

The regulator is typically located after the fuel rail and opens to the return line when the pressure reaches the set level. The excess fuel flows back to the tank, so the injectors get an even pressure. Many regulators can take a pressure reference from the intake so that fuel pressure follows boost pressure, but this depends on the model and installation. You will find other types in the parent category with fuel pressure regulators.

How to choose the right regulator

Here you will find adjustable EFI regulators from Fuelab with a pressure range of 25-90 PSI. Choose based on these criteria:

  • Design: The 515 has two inlets, while the 525 is an in-line model with one inlet. Choose according to how your lines need to be routed.
  • Connections: The inlet is available in -6AN or -10AN, and the return is -6AN. The inlet must match your hoses, fittings and the pump's flow.
  • Pressure range: Your operating pressure must be within 25-90 PSI and suit your injectors and engine management.
  • Colour: Black, red, blue or purple, so the regulator can match your engine bay.

After installation, you should set the pressure with a pressure gauge and check all connections for leaks. If you change the fuel pressure, the engine management typically needs to be adjusted. You will find more fuel system parts from Fuelab.

Frequently asked questions

What is the difference between a regulator with and without a return?

With a return, the regulator sends excess fuel back to the tank, typically from a position after the rail. Without a return, regulation takes place closer to the pump or tank. The choice depends on your fuel system and whether there is room for a return line.

Should I choose a -6AN or -10AN inlet?

The return is -6AN on the models here, while the inlet is available in -6AN and -10AN. Choose according to your hoses and fittings and the pump's flow. A larger inlet can be relevant at high flow, but it depends on the entire system.

How do I set the fuel pressure?

Fit a pressure gauge, start the engine, and adjust the regulator to the pressure your injectors and engine management are set up for. Check the pressure at idle and under load, and retighten the connections if you see any leaks.

View as Grid List
Sort by
Display per page

FUELAB Fuel Pressure Reg

flb51505-3-L-T
Fuelab 515 TBI Adjustable FPR Large Seat 10-25 PSI (2) -10AN In (1) -6AN Return - Blue
254,71 € excl. VAT

FUELAB Fuel Pressure Reg

flb52503-6-L-T
Fuelab 525 TBI Adjustable FPR In-Line Large Seat 10-25 PSI (1) -6AN In (1) -6AN Return - Green
254,71 € excl. VAT

FUELAB Fuel Pressure Reg

flb52503-6-S-G
Fuelab 525 EFI Adjustable FPR In-Line 90-125 PSI (1) -6AN In (1) -6AN Return - Green
254,71 € excl. VAT

FUELAB Fuel Pressure Reg

flb52501-3
Fuelab 525 EFI Adjustable FPR In-Line 25-90 PSI (1) -6AN In (1) -6AN Return - Blue
235,67 € excl. VAT

FUELAB Fuel Pressure Reg

flb52503-5-L-E
Fuelab 525 EFI Adjustable FPR In-Line Large Seat 25-90 PSI (1) -6AN In (1) -6AN Return - Gold
254,71 € excl. VAT

FUELAB Fuel Pressure Reg

flb51506-6-S-G
Fuelab 515 EFI Adjustable FPR 90-125 PSI (2) -6AN In (1) -6AN Return - Green
254,71 € excl. VAT