Warning Lights
Can you react in time if your oil pressure drops in the middle of a track day? A warning light in your field of view switches on at a signal from a sensor or a gauge and can catch your eye faster than a needle. This category is for you if you want to supplement the gauges in your project.
What a warning light does in the car
A warning light is a simple indicator that switches on when it receives a signal from a pressure switch, a temperature sensor, a gauge with an alarm output or an engine management system. It is typically used for oil pressure, coolant temperature or boost pressure, so you don't have to keep an eye on several needles at once. This category belongs under shift and warning lights, and here we carry lights from Hella, among others, including the Hella Warning Light 2Wb.
How to choose a warning light
The light must suit both the signal and the mounting location. Check these points for the specific light:
- Voltage and current draw: The light must match the car's electrical system, and an alarm output on a gauge may have a limit on how much current it can supply.
- Mounting: The hole diameter and the space behind the panel determine whether the light can sit in the dashboard or in a separate holder.
- Colour and brightness: The light must be visible in direct sunlight without dazzling you in the dark, and the colour should reflect how serious the warning is.
- Wiring: Check whether the light must be switched on the positive or the ground side, as this depends on the sensor or gauge.
Use a fuse and a good ground connection, and test the light by triggering the signal before driving the car. If the light is visible from outside, the requirements depend on the product and the car, and approval must be checked for the specific part number. If you want to combine the warning with a shift light, you can compare solutions under shift and warning lights.
Frequently asked questions
Can a warning light be connected directly to an oil pressure switch?
It often can, if the switch and the light are electrically compatible. Some switches connect to ground at low pressure, but it depends on the switch, so check its function and the light's current draw before installation.
Why is the warning light on all the time or not at all?
It can be a real fault, such as low oil pressure, but also incorrect wiring on the positive or ground side, a poor ground connection, a faulty switch or a blown fuse. Use a multimeter to check whether the signal changes before you replace the light.
Am I allowed to fit an extra warning light in the cabin?
It depends on the product and the car. Make sure the light does not dazzle you or can be seen from outside as other lighting, and that the requirements are met for your specific part number and your car.